Skip to content

QINFENG Custom FIBC manufacturer since 2001

Industry Solution · Resin & Compound Packaging Plastics & Polymers — industry page image 960 x 640 px
Plastic & Polymer Packaging 460 x 280 px
Plastic & Polymer Packaging Bagging PP, PE and PVC resin, granules and regrind so the material arrives at…
/ Industry Blueprint

Plastics & Polymers

FIBC packaging for plastic producers, compounders, masterbatch makers and polymer distributors: virgin resin, granules, regrind and pellets. The bag has to keep the material dry and free of contamination, take a pneumatic or open-mouth fill, and empty cleanly into the hopper the resin is processed from.

500–2,000 kg Bag Weight Range

Set per project from your fill weight and the safety factor you specify: 5:1 single trip or 6:1 multi trip

140–225 g/m² Fabric Range

Woven PP weight quoted from the load, with coating from 25 g/m² where the resin has to stay dry

PE / EVOH Liner Choice

Liner material follows how moisture-sensitive the grade is and what your extruder will accept

Type A–D Static Dissipation

Where resin dust and pneumatic conveying make charge a design input, the construction follows your dust classification

Dry Resin At The Hopper A coated body and a fitted PE or EVOH liner keep atmospheric moisture off hygroscopic grades, sized so the liner reaches the discharge spout without folding.
Contamination Control Coated fabric, sift-proof seams where dust matters and a clean inner wall on an unlined bag, so the load arrives as resin rather than resin and fibre.
Filling And Discharge On Your Line Open top, duffle top, filling spout and spout with flap on top; flat bottom, discharge spout, cone or iris closure below, chosen against your fill head and the hopper the bag empties into.
/ Industry Engineering

THE 4 PACKAGING RISKS THAT DECIDE THE SPEC IN PLASTICS & POLYMERS.

Resin is judged by what comes out of the bag at the extruder. These are the four risks that decide the specification for plastic and polymer packaging.

Risk 01 · Moisture

Wet Resin At The Extruder

Polyamide, PET and filled compounds pick up atmospheric moisture through an ordinary woven wall, and the batch arrives at the machine needing drying time nobody planned for.

QINFENG Answer: A coated body with a PE or EVOH liner fitted and closed at the fill head, so the resin is protected from the moment the bag is filled until it is emptied.
Risk 02 · Contamination

Dust, Fibre And Black Specks

A granule load that carries fabric fibre or settled dust becomes a rejected batch at the converter, and the complaint lands on the bag rather than on the handling.

QINFENG Answer: Sift-proof seams, a food-grade seam option where the grade calls for it, and an inner liner that keeps the resin off the woven wall entirely.
Risk 03 · Handling

Failure At The Fill Head Or The Hook

A tonne of resin is dense and drops hard, so loop height, webbing and reinforcement have to match your crane and fill head rather than a nominal safe working load.

QINFENG Answer: Loop type, webbing and reinforcement confirmed against your lifting equipment and fill weight, with the safety factor stated on the quotation.
Risk 04 · Cubing

Pallets That Do Not Stack

Tubular bags round off under load, so a container or warehouse plan drawn on square footprints loses height and the freight cost per tonne rises.

QINFENG Answer: U-Panel or baffle construction where the filled bag has to keep four flat sides; tubular where the resin is free-flowing and cost per tonne matters more than shape.
/ Bag Engineering

ENGINEERED FIBC CONSTRUCTIONS FOR PLASTICS & POLYMERS.

Configured for virgin resin, compounds, masterbatch and regrind, on lines that fill pneumatically or through an open mouth and discharge into a hopper.

Tubular FIBC Bags 600 x 400 px Lowest unit cost in the standard range

Tubular FIBC Bags

Custom tubular FIBC bags manufactured from circular woven polypropylene fabric, designed for bulk packaging of powders and granules. Available with customized dimensions, filling and discharge options, lifting loops and liner solutions.

  • Size: 90 x 90 x 120 cm to 100 x 100 x 135 cm (typical)
  • SWL / Safety Factor: 500 kg to 2,000 kg SWL
  • Top: Open top, duffle top, filling spout, with or without skirt
U-Panel FIBC Bags 600 x 400 px Squarer filled footprint

U-Panel FIBC Bags

U-Panel FIBCs are manufactured with one continuous U-shaped body panel and two additional side panels. Designed for handling a wide range of dry bulk materials, they offer flexible options for fabric, lifting loops, filling…

  • Size: 75 x 75 x 110 cm up to 100 x 100 x 150 cm (typical)
  • SWL / Safety Factor: 500 kg to 2,000 kg at 5:1, or 6:1 multi trip
  • Top: Open top, filling spout, duffel top, or skirt with tie cord
Baffle FIBC (Q Bag) 600 x 400 px Square footprint when filled

Baffle FIBC (Q Bag)

A four-panel FIBC with internal baffles or corner ties that hold a near-cube shape whether the bag is empty or part-filled. Built for loads that have to stack square in a container or on…

  • Size: Square base 85 x 85 x 85 cm to 105 x 105 x 120 cm
  • SWL / Safety Factor: 500-1,250 kg at 5:1; 1,000-2,000 kg at 6:1
  • Top: Duffle, filling spout, or open top with separate cover
/ Applications

SPECIFIC APPLICATIONS & PROCESS FLOWS.

The packaging setup we have written up for resin producers, compounders, masterbatch makers and polymer distributors.

/ Technical Quality

TESTING, COMPLIANCE & QUALITY ASSURANCE.

What the plastic and polymer work asks us to hold to, and how each point is checked before the bags ship.

1. Requirements & How We Verify Them

Fabric And Coating Fabric weight and coating weight checked on receipt, with the uncoated or coated grade stated on the specification.
Seam Construction Seam type and stitch count inspected on the production sample against the approved drawing, with sift-proof seams where the grade calls for them.
Liner Fit Liner dimensions checked against the bag so it reaches the discharge spout without folding, tearing or blocking the flow.
Print And Artwork Print checked against the approved artwork and colour reference on the first piece, before the run continues.

2. The Configuration Range We Quote

Tubular FIBC Bags · Size 90 x 90 x 120 cm to 100 x 100 x 135 cm (typical)
Tubular FIBC Bags · SWL / Safety Factor 500 kg to 2,000 kg SWL
U-Panel FIBC Bags · Size 75 x 75 x 110 cm up to 100 x 100 x 150 cm (typical)
U-Panel FIBC Bags · SWL / Safety Factor 500 kg to 2,000 kg at 5:1, or 6:1 multi trip
Baffle FIBC (Q Bag) · Size Square base 85 x 85 x 85 cm to 105 x 105 x 120 cm
Baffle FIBC (Q Bag) · SWL / Safety Factor 500-1,250 kg at 5:1; 1,000-2,000 kg at 6:1

Each row is the range its product record states; the confirmed figure is set per project.

Plastics & Polymers Quotation Checklist

1. Resin Type & Bulk Density:
Decides fill volume, whether a standard spout will choke, and whether the bag needs a liner at all.
2. Fill Weight & Safety Factor:
Sets the fabric, loop type and reinforcement: 5:1 single trip or 6:1 multi trip.
3. Filling And Discharge Equipment:
The fill head, the packing station and the hopper the bag empties into decide the spout and closure.
4. Moisture Sensitivity & Artwork:
Whether the grade needs a liner to stay dry, and the panel count, colours and print reference.
— DIRECT MANUFACTURER QUOTATION

Looking for Custom FIBC for Plastics & Polymers?

Share the material, the fill weight and how the bag is filled, lifted, stored and discharged at your site. Receive an itemized commercial quotation including CBM packing calculation, MOQ breakdown and sampling lead times.

FOB Terms: Customer Nominated Forwarder
Sampling: 7-14 Days Rapid Prototypes
Audit: Factory Inspection Ready
Request a Quote Direct response within 24 business hours.