Takes mixed, sharp-edged waste
Heavier fabric and a reinforced base resist the punctures and cuts that a standard powder bag cannot.
QINFENG Custom FIBC manufacturer since 2001
The body is a plain woven bag with an open top and a reinforced base, built heavier than a standard FIBC because the load is mixed, sharp-edged and often thrown in rather than poured. Lifting is by four corner loops, by fork sleeves sewn under the base, or by a combination of both, so the bag can be moved by the equipment a waste site already has.
Because the content is unknown in shape and weight, the specification is set from the worst case the site describes: rubble and offcuts with edges, glass, metal trim, soil and mixed packaging. That worst case drives the fabric weight, the base reinforcement and the loop or sleeve attachment.
A heavy-duty open-top bag for construction, yard and mixed waste, lifted by four loops or handled by fork sleeves. It is built for abrasion and puncture, not for dust control.
Heavier fabric and a reinforced base resist the punctures and cuts that a standard powder bag cannot.
Loops for crane or forklift jib, fork sleeves for a plain forklift, so the bag fits the equipment already on site.
Empty bags stack and store in a small space, which matters on sites with no covered storage.
Where the container does not come back, a bag is a lower-cost way to move the same material.
Uncoated fabric drains a little and resists abrasion better than a coated surface.
A batch sheet records the base reinforcement, the sleeve or loop stitch counts and the dimensions.
5 points decide how this bag is specified. Use the arrows, the dots, or a swipe.
Collecting garden and construction waste in bulk bags: heavy, mixed, sharp-edged loads moved by skip-hire operators, landscapers and site contractors.
Sandbags and aggregate bags for flood defence and emergency response: fast deployment, storage for years, and a bag that has to work…
| Rated range | Typical working range is 1,000-1,500 kg SWL with a reinforced base and four lifting points. The rating assumes the load is evenly distributed and the bag is lifted on all intended points; dragging a loaded bag, side lifting and loading sharp material from height all reduce service life and are confirmed per project. |
|---|
| Testing | In-house checks cover fabric weight, base reinforcement pattern, loop and sleeve stitch counts, and filled dimensions. Third-party testing is arranged on request and quoted separately. |
|---|
| Where it is not the answer | Not suitable for fine powders or dusty material, which escape through an open top and an uncoated weave, and not a replacement for a licensed waste container where the site's permit requires one. Sharp, heavy offcuts loaded from height will still cut any woven bag over time. |
|---|
Loading, lifting and standing full — the working conditions the specification is written for. Use the arrows, or drag the rail.
1 / 6