Skip to content

QINFENG Custom FIBC manufacturer since 2001

Chemicals & Industrial Powders Application brief

Plastic & Polymer Packaging

Plastic & Polymer Packaging 720 × 540 px

What goes in it

Pellets and other dry bulk solids, typically 0.8–1.6 t/m³.

Handling chain

Where the bag is handled, and by whom

Filling may happen at a third-party packer rather than the producer. Bags are stacked in a shed, lifted by forklift several times, then loaded into a container or a truck. Discharge happens at the far end of the chain, often by a party the producer never meets.

Filling station 560x360 560 × 360 px
Filling & sealing

Contract packing or producer spout

Filled on automated spouts or semi-manual toll lines. High-speed de-aeration shapes the square footprint before the bag leaves the fill station.

Shed stacking 560x360 560 × 360 px
Shed stacking

Warehouse buffer and quay stacking

Stacked two to three tiers high in transit warehouses. A baffle construction that does not bulge keeps the stack square instead of leaning into the aisle.

Forklift relift 560x360 560 × 360 px
Relifting

Quay crane and forklift relocation

Lifted three to five separate times by port stevedores. Reinforced loop anchoring and cross-corner loops resist fork abrasion and tine punctures.

Container stuffing 560x360 560 × 360 px
Container loading

20 ft and 40 ft container stuffing

Has to fit inside the container wall, at roughly 2,350 mm internal width. A square footprint uses the cube without the bag dragging on the wall.

What fails in this chain

Failure modes, and what we specify instead

In a long handling chain nobody owns the bag, so failures arrive as claims rather than as feedback. That is why the risks are designed out at the specification stage.

Risk 01

Bulging and unstable stacking

Hazard: A standard tubular bag rounds out as it fills, wasting container volume and leaning in a warehouse stack.

QINFENG defense: Internal perforated ultrasonic baffles hold a square profile after fill, which is what makes three-high stacking in a shed predictable.

Risk 02

Forklift puncture and tears

Hazard: Repeated lifting by rough tines tears side seams or frays loop attachment bases at transhipment hubs.

QINFENG defense: Heavier coated fabric with reinforced corner perimeter wraps and extra loop reinforcement backing, specified from the number of relifts.

Risk 03

Mis-marking and lost traceability

Hazard: Faded printing or a torn document pouch causes customs delays and rejected cargo at the destination port.

QINFENG defense: Flexographic printing with UV-cured inks and a reinforced document pocket sewn onto the body seam, agreed before production.

Risk 04

Unprotected quay UV exposure

Hazard: Unsheltered storage while awaiting vessel arrival degrades untreated polypropylene yarn within weeks.

QINFENG defense: UV-stabilised masterbatch in the tape, selected for how long the consignment actually waits on the quay rather than for the total storage period.

What we would quote

A construction that survives this chain

Primary construction
Baffle bag (Q-bag) or heavy four-panel structure
Fabric
190–220 gsm coated virgin PP with UV stabilisation
Lifting loops
4 × 30 cm cross-corner loops with reinforced base stitching
Inlet / outlet
Filling spout D40 × 50 cm or top skirt; bottom discharge spout with petal star closure
Safe working load
1,250–2,000 kg, at 5:1 single-trip or 6:1 multi-trip
Construction drawing for Plastic & Polymer Packaging
600 × 500 px

Before we can quote

The answers that decide the specification

Bag dimensions, baffle spacing and the safety margin all follow from these. Answer the ones you can and leave the rest; the missing details can be settled with our engineers.

  1. Essential

    Handling chain and route

    Who fills, who stacks, who loads, and how many times the bag is handled before discharge.

  2. Essential

    Container or truck loading plan

    How many bags per container or trailer, and whether the bags must hold a square footprint to fit the plan.

  3. Essential

    Fill weight and target SWL

    What is actually filled, and the margin you want over the nominal weight.

  4. Essential

    Identification and printing

    Brand, batch marking, label position and any destination-specific marking requirement.

Send these details to our engineers

Talk to the applications team

Send us the route, the payload and the container plan.

We will come back with the construction we would build, the safety factor it carries and the dimensions that fit your loading plan — with drawings and a prototype before any bulk run.

Start this quote FIBC selection guide

Engineering support for Plastic & Polymer Packaging
600 × 440 px