The range the filed grain workflow is quoted on
A light product: the bag fills to volume before weight
A warm fill closed in a sealed liner can condense
UV additive is set against how long filled bags wait outside before the lot moves.
THE 4 PACKAGING RISKS THAT DECIDE THE SPEC IN AGRICULTURE & FEED.
Moisture decides most grain and feed loads and low density decides the rest: the risks the filed grain workflow names.
Condensation On A Warm Fill
A warm fill closed in a sealed liner can condense in transit, and a wet pallet underneath rejects a load.
A Bag Filled To Its Volume
These products are light, so the bag fills to volume before weight: the body bulges and the stack becomes unstable.
Fine Feed At The Seam
Fine compound feed works through a seam in transit: product loss, and housekeeping at the pallet and the spout.
A Product That Has To Breathe
Where the product is filled warm, ventilation matters more than a liner, and a closed bag holds moisture in.
ENGINEERED FIBC CONSTRUCTIONS FOR AGRICULTURE & FEED.
Configured for grain, seed and feed: a low-density load that must stay dry and stack level.
U-Panel FIBC
A flat-bottom FIBC whose body is one U-shaped panel joined to two side panels, giving a squarer filled footprint than a tubular bag. It is the usual answer when a filled bag has to…
- Size: 75 x 75 x 110 cm up to 100 x 100 x 150 cm (typical)
- SWL / Safety Factor: 500 kg to 1,200 kg at 5:1; 6:1 on request
- Top: Open top, filling spout, duffel top, or skirt with tie cord
Food-grade FIBC
A bulk bag built around hygiene rather than around load: liner choice, closure, foreign-body control and batch traceability are the decisions that matter. The requirements that apply are confirmed per market and per project.
- Size: 75 x 75 x 110 cm to 100 x 100 x 130 cm (typical)
- Liner: Food-contact-intended PE film, loose or form-fitted
- Liner closure: Tied, heat-sealed or zip closure
SPECIFIC APPLICATIONS & PROCESS FLOWS.
The setups we have written up for grain elevators, feed mills and agricultural traders.
Grain & Feed Packaging
Bagging grain, seed and compound feed at an elevator or feed mill: high fill volumes, seasonal peaks, and a product that has to stay dry and free of mould until it is fed.
TESTING, COMPLIANCE & QUALITY ASSURANCE.
What the filed grain workflow asks us to hold to, and how each item is checked; market-specific requirements are confirmed per project.
1. Requirements & How We Verify Them
| Fill Volume And Weight | Bulk density and fill weight are read together, because a light product fills to volume first. |
|---|---|
| Liner And Fill Temperature | Whether the product is filled warm from a dryer is confirmed before the liner is quoted. |
| Seam Containment | Seam construction and stitch count are checked on production samples against the drawing. |
2. The Configuration Range We Quote
| U-Panel FIBC · Size | 75 x 75 x 110 cm up to 100 x 100 x 150 cm (typical) |
|---|---|
| U-Panel FIBC · SWL / Safety Factor | 500 kg to 1,200 kg at 5:1; 6:1 on request |
| Food-grade FIBC · Size | 75 x 75 x 110 cm to 100 x 100 x 130 cm (typical) |
| Food-grade FIBC · Liner | Food-contact-intended PE film, loose or form-fitted |
Each row is the range its product record states; the confirmed figure is set per project.
Agriculture & Feed Quotation Checklist
- 1. Product and bulk density:
- Grain, seed or feed type, and the bulk density, which decides whether the bag fills by weight or by volume.
- 2. Fill temperature:
- Whether the product is filled warm from a dryer, and the typical temperature at filling.
- 3. Storage period and conditions:
- Indoor or outdoor, stacked how high, and for how long the bag has to hold the product in good condition.
- 4. Fill weight and SWL:
- The weight the mill actually fills, and the SWL to be marked.