Complete discharge, no corner residue
A round base leaves no flat corner for powder to sit in, which matters where a changeover cannot tolerate carry-over between products.
Size
70 cm diameter x 100 cm to 110 cm diameter x 130 cm (typical)
SWL / Safety Factor
500 kg to 1,500 kg SWL
Top
Open top, duffle top, filling spout, with or without skirt
Lifting loops
Four-corner, cross-corner, single-loop, two-loop
Best for: Free-flowing powders and granules loaded to 500-1,500 kg that are emptied into a round hopper, pneumatic line or screw conveyor, where complete discharge matters more than…
Not the answer when: The filled bag has to stack flat on a pallet, hold a rectangular footprint in a container, or stay dimensionally stable on an automated line.
Confirm before quoting: The intake the bag is emptied into, SWL and safety factor, filling and discharge method, and whether a liner is needed.
/ Overview & Principle
HOW THIS BAG IS BUILT
Woven on circular looms as one continuous tube, with no vertical side seam in the body. The base is closed into a circle rather than folded into a rectangle, and the lifting loops are sewn into the top seam. Filling and discharge openings follow the customer’s line: an open top or a filling spout, and a discharge spout sized to how the material actually flows.
Because there is one body seam to control instead of four, the construction keeps the seam count of a tubular bag while removing the flat-bottom corner where fine product otherwise collects.
Operational summary:
A seamless circular-woven bag closed with a round base, so free-flowing product empties completely and the body stays circular under load.
/ Features
KEY DESIGN ADVANTAGES.
Fits round hoppers and pneumatic lines
The circular section matches the intake of a round hopper or screw conveyor, so the bag can be emptied without a liner or a shaking cycle.
One body seam to control
Seam leakage is the usual route for fine powders, and a circular body has one seam instead of four.
/ Construction & Performance
WHAT DECIDES THE SPECIFICATION.
5 points decide how this bag is specified. Use the arrows, the dots, or a swipe.
/ Configurations
CUSTOM CONFIGURATIONS & SIZING.
- Size
- 70 cm diameter x 100 cm to 110 cm diameter x 130 cm (typical) Set by the fill volume and the intake the bag is emptied into.
- SWL / Safety Factor
- 500 kg to 1,500 kg SWL Safety factor and test protocol confirmed at quotation stage.
- Top
- Open top, duffle top, filling spout, with or without skirt A skirt or duffle is the usual answer to dust at the fill point.
- Lifting loops
- Four-corner, cross-corner, single-loop, two-loop Loop type follows the lifting equipment at the customer's site.
/ Performance
PERFORMANCE, TESTING & LIMITS.
1. Performance & working envelope
| Rated range | Rated for 500-1,500 kg SWL in standard configurations, with fabric weight and loop construction set by the confirmed SWL and safety factor. Performance figures in a quotation apply to the confirmed specification only. |
|---|
2. How it is validated
| Testing | In-house checks cover fabric weight, seam strength and bag dimensions on each production run, with first-piece and final inspection recorded against the order. Third-party testing is arranged where the buyer's market requires it and is quoted separately. |
|---|
3. Limits
| Where it is not the answer | A round base does not sit flat on a pallet and the body does not hold a square footprint, so this is not the bag for pallet stacking or for container plans that depend on a rectangular load. |
|---|
Selection & Purchasing Guidance
- Best For:
- Free-flowing powders and granules loaded to 500-1,500 kg that are emptied into a round hopper, pneumatic line or screw conveyor, where complete discharge matters more than shape retention.
- Consider Alternatives When:
- The filled bag has to stack flat on a pallet, hold a rectangular footprint in a container, or stay dimensionally stable on an automated line.
- Must Confirm Before Quoting:
- The intake the bag is emptied into, SWL and safety factor, filling and discharge method, and whether a liner is needed.
/ On site
SEEN ON SITE.
Loading, lifting and standing full — the working conditions the specification is written for. Use the arrows, or drag the rail.
1 / 6
-
1000 x 625 px
Filled at the bagging line -
1000 x 625 px
Handled under the base -
1000 x 625 px
Lifted on the loops -
1000 x 625 px
Standing full in a yard -
1000 x 625 px
Base and seams after a load -
1000 x 625 px
Baled and stacked in the warehouse
Standard FIBC
THE OTHER BAGS IN THIS FAMILY.
Tubular FIBC
A seamless circular woven bag for free-flowing powders and granules; the lowest-cost standard construction where stackability is not the deciding…
View product →U-Panel FIBC
A flat-bottom FIBC whose body is one U-shaped panel joined to two side panels, giving a squarer filled footprint than…
View product →Baffle FIBC (Q Bag)
A four-panel FIBC with internal baffles or corner ties that hold a near-cube shape whether the bag is empty or…
View product →